Public FCC record for Ubiquiti AF3X (SWX-AF3X), a digital transmission system device filed by Ubiquiti Inc. Public exhibits include external photos, internal photos, a user manual, and RF exposure information. Radio evidence covers 3.7 GHz bands.
AF3X is the device filed under FCC ID SWX-AF3X by Ubiquiti Inc.
Public exhibits include internal and external photos, a user manual, RF exposure information, and wireless test reports.
The strongest extracted details are internal and external photos, wireless test measurements, and manual excerpts.
Those exhibits help verify what the device looks like, how its radios were tested, and setup or use details from the manual.
The listed radio coverage includes 3.7 GHz bands.
Manual excerpts cover button controls, status lights, and setup.
Raw application fields from the FCC record, shown separately from the plain-English summary.
A quick read on what each public FCC application changed or confirmed, with source links attached.
This FCC application appears to be the original authorization package for the device, with the matching grant and public exhibits grouped together.
This section summarizes what the FCC test documents say about the device's wireless connections and tested frequency ranges. RF exposure or SAR rows are compliance/safety context, not a speed or range claim.
This filing covers Wi-Fi-style wireless operation, including the shared frequency ranges shown below.
| FCC equipment class | DTS - digital wireless transmitterThe FCC shorthand for the radio behavior reviewed in this filing. |
|---|---|
| FCC rule parts | Part 90The rule sections cited by the grant or test documents. |
| Frequency bands | 3.7 GHz bands: 9 rangesThe radio ranges the FCC filing lists for the device.Source: FCC grant; 9 ranges grouped below |
| Frequency range | 3650 - 3700 MHzSource: Test Report p. 24 |
| Power density | 1 mW/cm2 | 0.97 mW/cm2RF exposure/SAR values are FCC compliance checks for radio energy near people, not product performance specs.Source: RF Exposure Info p. 1; RF Exposure Info p. 2 |
Product photos from public FCC exhibits, formatted for easier browsing. External photos show the enclosure and labels; internal photos show boards, antennas, and other compliance-relevant hardware.
Setup, reset, and status notes from the public manual. Use the official source document for full instructions and safety context.
Batch-approved public quick troubleshooting on 2026-05-02 after stricter OCR/source-evidence gate; only high-confidence passed rows with source-backed useful instructions were approved.
Searchable manual text plus skimmable details from the public FCC user manual.
The public manual includes useful button and port, status-light, power, and setup details.
Reset Button Management Port Data Port Management Port 10/100 Mbps, secured Ethernet port for configuration.
Signal LEDs Signal 4 LED will light blue when on.
a.
Install a Ground Wire 1.
Reset Button Management Port Data Port Management Port 10/100 Mbps, secured Ethernet port for configuration.
Signal LEDs Signal 4 LED will light blue when on.
LED State Status LINK Off RF Off Short Flash* Syncing Normal Flash* Beaconing Long Flash* Registering On Operational GPS Off No GPS Synchronization Normal Flash* Non-Operational (Weak Signal) On Operational (Strong Si...
We recommend that you configure your paired AF-3X radios before site installation.
The instructions in this section explain how to access the airFiber Configuration Interface and configure the following settings:
Install a Ground Wire 1.
Open the original FCC files used to check the details shown here. Badges separate whether a file is public from whether details from that file appear on this page.
Official FCC grant or authorization record.
Public user manual or setup guide from the FCC filing.
Internal product photo exhibit from the FCC filing.
External product photo exhibit from the FCC filing.
RF exposure exhibit from the FCC filing.
Additional FCC exhibits are grouped here by source type instead of repeated as individual rows.
